HSR-8498HB HMI Robot Servo

Hitech servo HSR-8498HB robotteihin


*Hitec Proprietary HMI
*Parameter Setting Capability
*Data Feedback (Position, Current, Voltage)
*RS-232C Daisy Chain Interface up to 128 servos
*Flexible Mechanism Design
*Dual Axis Mount
*Heavy Duty Karbonite Gears
*Dual Ball Bearing
*MOS Fet Drives

  • hinta 60 USD
Interface: HMI Protocol, RS-232C Daisy Chain, PWM
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Pulse Cycle: 12-26ms (Common: 21ms)
Operating Voltage: 6-7.4Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (6.0V): 0.20sec/60° at no load
Operating Speed (7.4V): 0.18sec/60° at no load
Stall Torque (6.0V): 102 oz/in. (
Stall Torque (7.4V): 124 oz/in. (
Operating Angle: Up to 180° Max
360 Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1100 to 1900usec
Current Drain (6.0V): 8mA/idle and 200mA no load operating
Current Drain (7.4V): 8.7mA/idle and 240mA no load operating
Dead Band Width: 8usec
Motor Type: 3 Pole Ferrite
Potentiometer Drive: Indirect Drive
Bearing Type: Dual Ball Bearing
Gear Type: Karbonite Gears
Connector Wire Length: 15.87" (400mm)
Dimensions: 1.57" x .78"x 1.45" (40 x 20 x 37mm)
Weight: 1.94 oz.. (55g)


Hitec_PC_Servo_Programmer.jpgValmist roboti Robonova

Kääntömoottorit kameralle

Unless otherwise stated, the content of this page is licensed under Creative Commons Attribution-ShareAlike 3.0 License